Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Japanese

Translating step 5

Step 5
Lift the camera-side end of the motherboard to separate it from the display frame. You may need to move some of the ribbon cables out of the way while you lift the motherboard. If the board is hard to lift, check that it is fully disconnected and not caught on any ribbon cables.
  • Lift the camera-side end of the motherboard to separate it from the display frame.

  • You may need to move some of the ribbon cables out of the way while you lift the motherboard. If the board is hard to lift, check that it is fully disconnected and not caught on any ribbon cables.

  • Do not fully remove the motherboard yet—it is still attached to the daughterboard via a ribbon cable on the underside of the motherboard.

ディスプレイフレームからカメラ側先端のマザーボードを持ち上げて、取り外します。

マザーボードを持ち上げながら、作業の邪魔にならないように、リボンケーブルを動かす必要があるかもしれません。基板が持ち上げにくい場合は、基板の接続が完全に外れていて、リボンケーブルに巻き込まれていないか確認してください。

マザーボードを完全に取り外さないでください。マザーボードの下では、リボンケーブルがドーターボードと繋がっています。

Your contributions are licensed under the open source Creative Commons license.