Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Italian

Translating step 5

Step 5
Lift the camera-side end of the motherboard to separate it from the display frame. You may need to move some of the ribbon cables out of the way while you lift the motherboard. If the board is hard to lift, check that it is fully disconnected and not caught on any ribbon cables.
  • Lift the camera-side end of the motherboard to separate it from the display frame.

  • You may need to move some of the ribbon cables out of the way while you lift the motherboard. If the board is hard to lift, check that it is fully disconnected and not caught on any ribbon cables.

  • Do not fully remove the motherboard yet—it is still attached to the daughterboard via a ribbon cable on the underside of the motherboard.

Solleva la scheda madre dal lato della fotocamera per separarla dal telaio del display.

Può essere necessario spostare alcuni cavi a nastro che potrebbero intralciare la rimozione della scheda madre. Se la scheda oppone resistenza al distacco, controlla che sia completamente di sconnessa e non impigliata in alcun cavo a nastro.

Non rimuovere ancora completamente la scheda madre – un cavo piatto collega la scheda figlia alla parte inferiore della scheda madre.

Your contributions are licensed under the open source Creative Commons license.