Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Italian

Translating step 1

Step 1
Insert a plastic opening pick between the case and the battery. Be careful to keep the pick as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. Push the pick further in to separate the battery from the phone.
  • Insert a plastic opening pick between the case and the battery.

  • Be careful to keep the pick as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Push the pick further in to separate the battery from the phone.

  • If the battery is too strongly adhered for the opening pick, place a warm iOpener over the battery to loosen the adhesive.

  • Alternatively, apply some isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.

  • Do not pry against the motherboard or you may damage the phone.

Inserisci una levetta di apertura tra il case e la batteria.

Stai attento a mantenere la levetta il più possibile piatta per evitare di deformare la batteria, che potrebbe danneggiarsi e rilasciare sostanze chimiche pericolose.

Inserisci la levetta più in profondità per separare la batteria dal telefono.

Se la colla della batteria oppone una resistenza troppo alta alla levetta, metti un iOpener caldo sulla batteria per allentare l'adesivo.

Non far leva contro la scheda madre: potresti danneggiare il telefono.

Your contributions are licensed under the open source Creative Commons license.