Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.


Translating step 3

Step 3
Remove the following 3 screws:
  • Remove the following 3 screws:

  • One Phillips #00 screw securing the logic board to the iPhone near the camera.

  • Two Phillips #00 screws, one on either corner of the logic board.

Retirez les 3 vis suivantes:

Une vis cruciforme Phillips #00 qui attache la carte mère à l'iPhone près de la caméra.

Deux vis cruciformes Phillips #00 situées dans les deux coins de la carte mère.

Your contributions are licensed under the open source Creative Commons license.