Skip to main content

Fix Your Stuff

Right to Repair


Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.


Translating step 11

Step 11
Remove the following screws:
  • Remove the following screws:

  • Two 7 mm T6 Torx screws from the DC-In board

  • Five 3.3 mm T6 Torx screws

  • Two 4 mm T6 Torx screws


交流电源板上的两颗7mm T6 梅花螺丝

五颗3.3mm T6 梅花螺丝。

两颗4 mm T6 梅花螺丝。

Your contributions are licensed under the open source Creative Commons license.