Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.


Translating step 11

Step 11
Remove the following screws:
  • Remove the following screws:

  • Two 7 mm T6 Torx screws from the DC-In board

  • Five 3.3 mm T6 Torx screws

  • Two 4 mm T6 Torx screws


7 mm T6トルクスネジー2本

3.3 mm T6トルクスネジー5本

4 mm T6トルクスネジー2本

Your contributions are licensed under the open source Creative Commons license.