Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Japanese

Translating step 4

Step 4
Pull the camera cable connector toward the optical drive to disconnect it from the logic board.
  • Pull the camera cable connector toward the optical drive to disconnect it from the logic board.

  • This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.

カメラケーブルコネクタを光学ドライブ側に向けて引っ張り、基板から接続を外します。

このソケットはメタル製で簡単に曲がってしまいます。コネクタを基板上のソケットと接続させる前に、位置を合わせて確認してください。

Your contributions are licensed under the open source Creative Commons license.