Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

English
Japanese

Translating step 1

Step 1
Remove the two T6 Torx screws from each side of the hard drive (four screws total). You'll need to transfer these screws to your new hard drive if you're changing drives.
  • Remove the two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

ハードドライブの両側からT6トルクスネジを2本ずつ外します(計4本のネジ)

ハードドライブを交換する場合は、これらのネジを新しいハードドライブに移してください。

新しいハードドライブを装着する際は、OS X インストールガイドを参照してください。

Your contributions are licensed under the open source Creative Commons license.