Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Spanish

Translating step 4

Step 4
The clutch cover is constructed from aluminum and is held on to the clutch hinges with metal clips that require a good deal of force to remove. Proceed with caution. Use your thumbs to push the clutch cover away from the clutch hinges.
  • The clutch cover is constructed from aluminum and is held on to the clutch hinges with metal clips that require a good deal of force to remove. Proceed with caution.

  • Use your thumbs to push the clutch cover away from the clutch hinges.

  • While pressing with your thumbs, rotate the clutch cover toward yourself about its long edge to pop it off the clutch hinge.

  • It may be necessary to wiggle the clutch cover while pressing it away from the clutch hinges to release the retaining clips.

La cubierta del embrague está construida de aluminio y se sujeta a las bisagras del embrague con clips metálicos que requieren mucha fuerza para quitarse. Procede con precaución.

Usa tus pulgares para empujar la cubierta del embrague lejos de las bisagras del embrague.

Mientras presionas con los pulgares, gira la cubierta del embrague hacia ti sobre su borde largo para sacarla de la bisagra del embrague.

Puede ser necesario mover la cubierta del embrague mientras la presionas hacia afuera de las bisagras del embrague para liberar los clips de retención.

Your contributions are licensed under the open source Creative Commons license.