Skip to main content
English
French

Translating step 3

Step 3
The following steps are for your new trigger assembly. Be careful not to cut the wire while stripping the insulation off.
  • The following steps are for your new trigger assembly.

  • Be careful not to cut the wire while stripping the insulation off.

  • Using 16 gauge wire strippers, strip about one quarter inch off both the white wire of your new trigger assembly, and the white wire coming out of the translucent orange fuse.

Les étapes suivantes concernent votre nouvelle gâchette.

Faites attention à ne pas couper le fil en le dénudant.

À l'aide de pinces à dénuder de calibre 16, dénudez environ un quart de pouce du fil blanc de votre nouvelle gâchette, et du fil blanc qui sort du fusible orange translucide.

Your contributions are licensed under the open source Creative Commons license.