Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

English
French

Translating step 4

Step 4
Unscrew the eight 15 mm T10 Torx screws from the housing The screw hole located nearest the battery port is deep and small. Most screwdrivers with replaceable bits will not fit into the hole. Instead, use a conventional screwdriver that fits.
  • Unscrew the eight 15 mm T10 Torx screws from the housing

  • The screw hole located nearest the battery port is deep and small. Most screwdrivers with replaceable bits will not fit into the hole. Instead, use a conventional screwdriver that fits.

Dévisser les huit vis Torx T10 de 15 mm du boîtier

Le trou de vis situé le plus près du logement de la batterie est profond et petit. La plupart des tournevis à embout remplaçable ne s'insèrent pas dans le trou. Utilisez plutôt un tournevis classique qui s'adapte.

-[* red] Unscrew the eight 15 mm T10 Torx screws from the housing
-[* icon_note] The screw hole located nearest the battery port is deep and small. Most screwdrivers with replaceable bits will ***++not++*** fit into the hole. Instead use a conventional screwdriver that fits.
+[* black] Unscrew the eight 15 mm T10 Torx screws from the housing
+[* icon_note] The screw hole located nearest the battery port is deep and small. Most screwdrivers with replaceable bits will ***++not++*** fit into the hole. Instead, use a conventional screwdriver that fits.

Your contributions are licensed under the open source Creative Commons license.