Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

English
French

Translating step 3

Step 3
Unscrew the four 16 mm long screws from the back panel with a T10 Torx Screwdriver. Use a firm grip to peel off the back panel. It is sealed tight and requires a good amount of force to remove. Use a firm grip to peel off the back panel. It is sealed tight and requires a good amount of force to remove.
  • Unscrew the four 16 mm long screws from the back panel with a T10 Torx Screwdriver.

  • Use a firm grip to peel off the back panel. It is sealed tight and requires a good amount of force to remove.

Dévissez les quatre vis de 16 mm de long du panneau arrière à l'aide d'un tournevis Torx T10.

Utilisez une prise ferme pour enlever le panneau arrière. Il est bien scellé et nécessite une bonne dose de force pour l'enlever.

[* black] Unscrew the four 16 mm long screws from the back panel with a T10 Torx Screwdriver.
-[* black] Use a firm grip to peel the the back panel off. It is sealed tight and requires a good amount of force to remove.
+[* black] Use a firm grip to peel off the back panel. It is sealed tight and requires a good amount of force to remove.

Your contributions are licensed under the open source Creative Commons license.