Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Italian

Translating step 4

Step 4
Use an iOpener or a heat gun to loosen up the adhesive securing the motherboard to the display assembly. Use a plastic opening tool to gently pry the motherboard free of the display assembly. At this point, the bottom speaker is still attached to the motherboard. If you are only replacing the motherboard, refer to the bottom speaker guide to swap your existing speaker to the new motherboard.
  • Use an iOpener or a heat gun to loosen up the adhesive securing the motherboard to the display assembly.

  • Use a plastic opening tool to gently pry the motherboard free of the display assembly.

  • At this point, the bottom speaker is still attached to the motherboard. If you are only replacing the motherboard, refer to the bottom speaker guide to swap your existing speaker to the new motherboard.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.