Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Italian

Translating step 4

Step 4
Remove the following two screws:
  • Remove the following two screws:

  • One #00 Phillips screw with a large head near the headphone jack.

  • One #00 Phillips screw with a smaller head near the side of the iPod. This screw strips easily, so be sure to press down firmly on the screwdriver.

Svita le seguenti due viti:

Una vite a croce Phillips #00 con una testa larga vicino alla presa jack.

Una vite a croce Phillips #00 con una testa più piccola vicino al bordo dell'iPod. Questa vite si spana facilmente, quindi assicurati di premere con decisione sul cacciavite.

Your contributions are licensed under the open source Creative Commons license.