Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

English
Chinese

Translating step 4

Step 4
Use an iOpener or a heat gun to loosen up the adhesive securing the motherboard to the display assembly. Use a plastic opening tool to gently pry the motherboard free of the display assembly. At this point, the bottom speaker is still attached to the motherboard. If you are only replacing the motherboard, refer to the bottom speaker guide to swap your existing speaker to the new motherboard.
  • Use an iOpener or a heat gun to loosen up the adhesive securing the motherboard to the display assembly.

  • Use a plastic opening tool to gently pry the motherboard free of the display assembly.

  • At this point, the bottom speaker is still attached to the motherboard. If you are only replacing the motherboard, refer to the bottom speaker guide to swap your existing speaker to the new motherboard.

使用 iOpener 或热风枪来融化把母版固定到显示屏组件上的胶水。

使用塑料开机工具轻轻地撬动母版,脱离显示屏。

这个时候,底部扬声器仍然连在主板上。如果你只是替换主板的话,参考底部扬声器 指南来把现有的扬声器替换到新的主板上面。

Your contributions are licensed under the open source Creative Commons license.