Skip to main content
English
Japanese

Translating step 1

Step 1
Use a spudger to carefully pry up the headphone jack board from the logic board. Be careful to pry up near the connector to prevent unnecessary strain on the board.
  • Use a spudger to carefully pry up the headphone jack board from the logic board. Be careful to pry up near the connector to prevent unnecessary strain on the board.

スパッジャーを使って、ロジックボードからヘッドホンジャックボードを注意深く持ち上げます。基板上に不要な歪みを与えないようにするため、コネクタ付近を持ち上げてください。

Your contributions are licensed under the open source Creative Commons license.