Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Chinese

Apple Watch 胶粘剂的更换

Guide Information

= Done = Incomplete
    OpeningIf you removed your Apple Watch will destroy the adhesive that keeps it together. Finish every repair by replacing Watch’s screen but don’t need to replace the [https://www.ifixit.com/Guide/Apple+Watch+Force+Touch+Sensor+Replacement/41084|Force Touch sensor], you can use this guide to install a strip of pre-cut adhesive and following the reassembly guide shown here. seal your watch closed.
    OpeningIf you removed your Apple Watch will destroy the adhesive that keeps it together. Finish every repair by replacing Watch’s screen but don’t need to replace the [https://www.ifixit.com/Guide/Apple+Watch+Force+Touch+Sensor+Replacement/41084|Force Touch sensor], you can use this guide to install a strip of pre-cut adhesive and following the reassembly guide shown here. seal your watch closed.

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      使用塑料撬棒来分离屏幕背后的粘合剂。

      Step 2

      你可以使用镊子来剥离粘合剂。

      Step 3

      用镊子来将外环的胶带剥离。

      Step 4

      将胶带背面放在Force Touch 传感器上,围绕在设备外壳的边缘处。

      Step 5

      用撬棒来重新连接显示屏排线。

      Step 6

      重新安装金属支架。 将单个卡舌与下半部分对其,然后滑下支架。

      Step 7

      将电源排线安装到手表主体之中。

      Step 8

      把电池按入到插槽之中。

      Step 9

      使用镊子把双面胶上的棕色保护层去掉。

      Step 10

      将屏幕向右移动,折叠排线。

      Your contributions are licensed under the open source Creative Commons license.