Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Chinese

Translating step 2

Step 2
Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
Apply heat
  • Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.

  • Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.

  • You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.

准备一个 iOpener (或者拿一个电吹风机或热风枪),将加热过的 iOpener 放在表的正面,直到它摸起来稍微有点烫。

将你的 iOpener 留在上面至少一分钟,使得屏幕充分受热并软化粘合剂。

你或许需要多次从复以上步骤,当然,也可以将 iOpener 在手表正面冷却的部分慢慢摩擦旋转,以便有足够温度去取下屏幕。

Your contributions are licensed under the open source Creative Commons license.