Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 8

Step 8
While holding the Air steady, remove the remaining 5.6 mm T8 Torx screw from the left display bracket.
  • While holding the Air steady, remove the remaining 5.6 mm T8 Torx screw from the left display bracket.

Während du das Air stabil hältst, entferne die übrige 5,6 mm T8 Torx Schraube von der linken Displayklammer.

Your contributions are licensed under the open source Creative Commons license.