Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
German

Translating step 2

Step 2
Use the flat end of a spudger to pry the left speaker cable connector up and out of its socket on the I/O board. Pry up from beneath the wires.
  • Use the flat end of a spudger to pry the left speaker cable connector up and out of its socket on the I/O board.

  • Pry up from beneath the wires.

Heble mit dem flachen Ende eines Spudgers den Kabelstecker des linken Lautsprechers nach oben und aus dem Anschluss auf der I/O Karte heraus.

Setze mit dem Hebel unter den Kabeln an.

Your contributions are licensed under the open source Creative Commons license.