Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 1

Step 1
Using a Philips head #00 screwdriver locate and remove each of the four screws located along the tall side of the iRulu.
  • Using a Philips head #00 screwdriver locate and remove each of the four screws located along the tall side of the iRulu.

  • There may be plastic covers protecting the screws, if this is the case take a phillips head screwdriver, and gently apply pressure on the covers until they come off.

À l'aide d'un tournevis cruciforme n ° 00, localisez et retirez chacune des quatre vis situées le long du grand côté de l'iRulu.

Des couvercles en plastique peuvent protéger les vis. Si tel est le cas, prenez un tournevis cruciforme et appliquez une légère pression sur les couvercles jusqu'à ce qu'ils se détachent.

Your contributions are licensed under the open source Creative Commons license.