Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 46 guides that include this step.

English
Japanese

Translating step 2

Step 2
Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board. Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.
  • Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board.

  • Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.

スパッジャーの平面側先端を使って、バッテリーコネクターをロジックボード上のソケットからまっすぐ持ち上げます。

コネクターのみ持ち上げるよう確認しながら作業を進めてください。ソケットには接触しないでください。ロジックボードに永久的なダメージを与えてしまうことがあります。

Your contributions are licensed under the open source Creative Commons license.