Skip to main content
English
Spanish

Translating step 7

Step 7
These components are putting up an orchestrated effort to avoid our eyes. We use our plastic opening tool to nudge the trackpad control board out of our way, but not remove it... Apple decided to solder the largest cables onto the trackpad board, meaning we'll have to just flip it out of the way for now. Y U NO ZIF, Apple?
  • These components are putting up an orchestrated effort to avoid our eyes. We use our plastic opening tool to nudge the trackpad control board out of our way, but not remove it...

  • Apple decided to solder the largest cables onto the trackpad board, meaning we'll have to just flip it out of the way for now. Y U NO ZIF, Apple?

  • The new trackpad board has some interesting ICs:

  • ST Microelectronics 32F103 ARM Cortex-M based microcontroller

  • Broadcom BCM5976 touch screen controller

  • This is the same lil' guy found in the iPhone 5s as well as the iPad Air.

Estos componentes están esforzándose para evitar ser vistos. Usamos la herramienta plástica de apertura para empujar la placa de control del panel táctil fuera del camino, pero no sacarla...

Apple decidió soldar los cables más grandes en la placa del panel táctil, lo que significa que vamos a tener que voltearla fuera del camino por ahora.

La nueva placa de panel táctil tiene algunos circuitos integrados interesantes:

Microcontrolador ARM Cortex-M ST Microelectronics 32F103

Controlador de pantalla táctil Broadcom BCM5976

Este es el pequeño que se encuentra en el iPhone 5s así como también en el iPad Air.

Your contributions are licensed under the open source Creative Commons license.