Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Chinese

Translating step 1

Step 1
Remove both 6 mm screws from the clip side of the camera. After you have removed the two screws, remove both the clip and the plate behind the clip so that the inside of the camera is exposed.
Clip Side Repair
  • Remove both 6 mm screws from the clip side of the camera.

  • After you have removed the two screws, remove both the clip and the plate behind the clip so that the inside of the camera is exposed.

  • If one of more of the clips appear to be broken, the back plate might need to be replaced.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.