Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 1

Step 1
Remove both 6 mm screws from the clip side of the camera. After you have removed the two screws, remove both the clip and the plate behind the clip so that the inside of the camera is exposed.
Clip Side Repair
  • Remove both 6 mm screws from the clip side of the camera.

  • After you have removed the two screws, remove both the clip and the plate behind the clip so that the inside of the camera is exposed.

  • If one of more of the clips appear to be broken, the back plate might need to be replaced.

Retirez les deux vis de 6 mm du côté clip de la caméra.

Après avoir retiré les deux vis, retirez le clip et la plaque derrière le clip afin que l'intérieur de la caméra soit exposé.

Si l'un ou plusieurs des clips semblent cassés, la plaque arrière devra peut-être être remplacée.

Your contributions are licensed under the open source Creative Commons license.