Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Dutch

Translating step 5

Step 5
Using pair of channel locks or large pliers, pinch together and pull back the hose clamp securing the hose to the coolant intake. If the factory hose clamps have been replaced, you may need a screwdriver to remove the replacement hose clamps.
  • Using pair of channel locks or large pliers, pinch together and pull back the hose clamp securing the hose to the coolant intake.

  • If the factory hose clamps have been replaced, you may need a screwdriver to remove the replacement hose clamps.

  • There is probably still coolant in the tube so try not to spill it everywhere when removing the hose.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.