Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
Japanese
Previous step

Translating step 46

Step 46
Lift the logic board by the camera end and gently pull the Lightning connector housing out of the rear case. Remove the logic board from the iPad. If there is any resistance from the Lighting port cable stop pulling to avoid ripping the cable. Slide the opening pick under the length of the cable again to fully free it from the rear case.

  • Lift the logic board by the camera end and gently pull the Lightning connector housing out of the rear case.

  • Remove the logic board from the iPad.

  • If there is any resistance from the Lighting port cable stop pulling to avoid ripping the cable. Slide the opening pick under the length of the cable again to fully free it from the rear case.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.