Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 45

Step 45
Carefully insert the flat end of a spudger between the rear-facing camera and the top of the logic board. Pry the logic board up enough to grab it with your fingers.
  • Carefully insert the flat end of a spudger between the rear-facing camera and the top of the logic board.

  • Pry the logic board up enough to grab it with your fingers.

  • Be extremely careful not to damage the rear-facing camera cable, or any logic board components.

  • If the logic board does not lift easily, there may still be adhesive holding it to the rear case. Try sliding the pick farther before prying again.

背面カメラとロジックボード上部の間に、スパッジャーの平面側先端を注意深く差し込みます。

ロジックボードを指で掴めるまで持ち上げます。

背面カメラやロジックボードコンポーネントにダメージを与えないよう細心の注意を払ってください。

ロジックボードが容易に持ち上がらなければ、リアケースにまだ接着剤が残っているかもしれません。再び持ち上げる前に、ピックをさらにスライドしてみてください。

Your contributions are licensed under the open source Creative Commons license.