Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
Japanese
Previous step Next step

Translating step 15

Step 15
Use the flat end of a spudger to disconnect the rear-facing camera cable from its socket on the logic board. Be careful to only pry on the connector, not on the socket itself. Fold the rear-facing camera cable out of the way of the logic board.

  • Use the flat end of a spudger to disconnect the rear-facing camera cable from its socket on the logic board.

  • Be careful to only pry on the connector, not on the socket itself.

  • Fold the rear-facing camera cable out of the way of the logic board.

スパッジャーの平面側先端を使って、ロジックボード上のソケットから背面カメラケーブルの接続を外します。

ソケットではなく、コネクタのみを持ち上げてください。

背面カメラケーブルを折りたたみ、ロジックボードへの作業の邪魔にならないよう片づけます。

Your contributions are licensed under the open source Creative Commons license.