Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Japanese

Translating step 1

Step 1
Lay out a soft cloth on your workspace to prevent scratching the screen in this and future steps. Pry open the back casing using the soft plastic opening pick.
  • Lay out a soft cloth on your workspace to prevent scratching the screen in this and future steps.

  • Pry open the back casing using the soft plastic opening pick.

  • Be careful of the Power & Volume Key ribbon on the left side just next to the volume key. The ribbon is exposed and could be damaged with the opening tool.

  • Carefully pull the back casing apart from the rest of the phone with your hands. Because the casing is glued to the rest of the phone, this step may require some force. Don't be alarmed if the casing flexes a bit.

  • You may need an iOpener to loosen up the adhesive. Check out the iOpener Instructions for info on how to use it.

このガイド中の作業では、柔らかい布などを作業台に敷いて、スクリーンに傷が入らないようにします。

柔らかいプラスチックの開口ピックを使って、裏側ケースをこじ開けます。

左側の音量キーの隣にある電源と音量のキーのリボンケーブルにご注意ください。リボンは露出しており、開口ツールでダメージを与えてしまうことがあります。

手で慎重にデバイス本体からリアケースから引き離します。 ケースはデバイスの一部に接着剤で固定されているため、この作業には多少の力が必要になる場合があります。 ケースが若干変形しても心配しないでください。

接着剤を柔らかくするには、iOpenerの利用方法を参照してください。

下側のコーナーに小サイズの吸盤カップを装着して、バックケースをわずかに持ち上げ、生じた隙間に開口ツールを差し込むことができます。

[* black] Lay out a soft cloth on your workspace to prevent scratching the screen in this and future steps.
[* black] Pry open the back casing using the soft plastic opening pick.
[* icon_caution] Be careful of the Power & Volume Key ribbon on the left side just next to the volume key. The ribbon is exposed and could be damaged with the opening tool.
[* black] Carefully pull the back casing apart from the rest of the phone with your hands. Because the casing is glued to the rest of the phone, this step may require some force. Don't be alarmed if the casing flexes a bit.
[* icon_note] You may need an [product|IF145-198-4] to loosen up the adhesive. Check out the [guide|11677|new_window=true] for info on how to use it.
[* icon_note] You can use a [product|IF145-019] on the bottom corner to slightly lift up the back casing and help slipping the tool under the cover.

Your contributions are licensed under the open source Creative Commons license.