Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

English
Italian

Translating step 2

Step 2
Slide the spudger under the battery side of the digitizer board to begin separating it from the rear case. Lift the digitizer board up to free the last of the adhesive. Lift the digitizer board up to free the last of the adhesive.
  • Slide the spudger under the battery side of the digitizer board to begin separating it from the rear case.

  • Lift the digitizer board up to free the last of the adhesive.

Fai scorrere lo spudger sotto il bordo della scheda del digitizer dal lato della batteria per iniziare a rimuovere la cella dal case posteriore.

Solleva la scheda del digitizer per separarla dall'adesivo.

Your contributions are licensed under the open source Creative Commons license.