Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
German

Translating step 3

Step 3
Gently lift the corner of the display glass enough to insert a spudger between it and the display assembly. Use the flat end of a spudger to gently pry up the adhesive securing the front glass to the display. Pry up the glass panel a few inches away from the upper right corner along the top and right edges of the display.
  • Gently lift the corner of the display glass enough to insert a spudger between it and the display assembly.

  • Use the flat end of a spudger to gently pry up the adhesive securing the front glass to the display.

  • Pry up the glass panel a few inches away from the upper right corner along the top and right edges of the display.

Hebe die Ecke des Displayglases vorsichtig an, bis du einen Spudger zwischen ihm und der Displayeinheit einsetzen kannst.

Heble das Displayglas vorsichtig mit dem flachen Ende des Spudgers aus der Klebeverbindung zum Display heraus.

Heble das Glas einige Zentimeter von der oberen rechten Ecke aus an der oberen und seitlichen Kante hoch.

Your contributions are licensed under the open source Creative Commons license.