Skip to main content
English
Italian

Translating step 7

Step 7
Use the edge of your small flathead screwdriver or another thin and sharp object to carefully pull up a corner of the blue or white plastic sheet covering the adhesive on the bottom of both heat sinks. Be careful not to wrinkle or peel up the adhesive in the process.
  • Use the edge of your small flathead screwdriver or another thin and sharp object to carefully pull up a corner of the blue or white plastic sheet covering the adhesive on the bottom of both heat sinks.

  • Be careful not to wrinkle or peel up the adhesive in the process.

  • Peel the protective sheets off the adhesive on both heat sinks.

Usa la punta del tuo piccolo cacciavite piatto o un altro strumento appuntito per sollevare delicatamente un angolo del foglio protettivo in plastica blu o bianca che ricopre l'adesivo sul fondo di entrambi i dissipatori.

Stai attendo a non far raggrinzire o rimuovere l'adesivo nella procedura.

Rimuovi le coperture protettive su entrambi i dissipatori.

Your contributions are licensed under the open source Creative Commons license.