Skip to main content
English
Italian

Translating step 4

Step 4
Use the 1/4" socket drive end of the included screwdriver with no bit inserted to remove the four X-clamp posts from both the CPU and GPU heatsinks.
  • Use the 1/4" socket drive end of the included screwdriver with no bit inserted to remove the four X-clamp posts from both the CPU and GPU heatsinks.

Usa la presa per le punte da 1/4" del cacciavite incluso (senza nessuna punta inserita) per rimuovere i quattro supporti di bloccaggio per l'X clamp dai dissipatori per la GPU e la CPU.

Your contributions are licensed under the open source Creative Commons license.