Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 4

Step 4
Use the flat end of a spudger to lift the rear-facing camera connector up off of its socket on the logic board. Gently push the rear-facing camera cable away from the logic board.
  • Use the flat end of a spudger to lift the rear-facing camera connector up off of its socket on the logic board.

  • Gently push the rear-facing camera cable away from the logic board.

Hebe den Stecker der Rückkamera mit dem flachen Ende des Spudgers aus seinem Anschluss auf dem Logic Board.

Schiebe das Kabel zur Rückkamera vorsichtig vom Logic Board weg.

Your contributions are licensed under the open source Creative Commons license.