Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 1

Step 1
Remove the following Phillips #00 screws from the right antenna:
  • Remove the following Phillips #00 screws from the right antenna:

  • Three 1.5 mm screws

  • One 2.6 mm screw

Entferne folgende Kreuzschlitzschrauben #00 von der rechten Antenne:

Drei 1,5 mm Schrauben

Eine 2,6 mm Schraube

Your contributions are licensed under the open source Creative Commons license.