Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.


Translating step 3

Step 3
Remove the heat sink from the logic board.
  • Remove the heat sink from the logic board.

  • If the heat sink appears to be stuck to the logic board after removing all eight screws, it may be helpful to use a spudger to separate the two components.

  • If you need to mount the heat sink back onto the logic board, we have a thermal paste guide that makes replacing the thermal compound easy.

Entferne den Kühlkörper vom Logic Board.

Wenn der Kühlkörper nach dem Entfernen der acht Schrauben scheinbar am Logic Board festgeklebt, dann kannst du die beiden Bauteile mit einem Spudger voneinander trennen.

Wenn du den Kühlkörper wieder am Logic Board befestigen willst, dann hilft dir unsere Anleitung für Wärmeleitpaste bei der Montage.

Your contributions are licensed under the open source Creative Commons license.