Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

English
German

Translating step 1

Step 1
Remove the eight 8.3 mm Phillips screws securing the heat sink to the logic board.
  • Remove the eight 8.3 mm Phillips screws securing the heat sink to the logic board.

  • Be sure to keep track of the springs held under each of the screws.

Entferne die acht 8,3 mm Kreuzschlitzschrauben, mit denen der Kühlkörper am Logic Board befestigt ist.

Achte auf die Federn unter den Schrauben und bewahre sie gut auf.

Your contributions are licensed under the open source Creative Commons license.