Skip to main content
English
German

Translating step 1

Step 1
Pull the DC-In board connector out of its socket on the logic board.
  • Pull the DC-In board connector out of its socket on the logic board.

  • Pull the cables parallel to the face of the logic board toward the heat sink.

Ziehe den Stecker der Versorgungsplatine (DC-In Board) aus seinem Anschluss auf dem Logic Board heraus.

Ziehe die Kabel parallel zur Oberfläche des Logic Boards zum Kühlkörper hin.

Your contributions are licensed under the open source Creative Commons license.