Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 16

Step 16
Remove the following eight screws securing the logic board and DC-In board to the upper case:
  • Remove the following eight screws securing the logic board and DC-In board to the upper case:

  • Six 3.2 mm Phillips screws

  • These may be T6 Torx screws on the Early 2011 model.

  • Two 7.6 mm Phillips screws

Entferne folgende acht Schrauben, mit denen das Logic Board und die Versorgungsplatine (DC-In Board) am oberen Gehäuse befestigt sind:

Sechs 3,2 mm Kreuzschlitzschrauben

Am Modell von Anfang 2011 können dies auch Torx T6 Schrauben sein.

Zwei 7,6 mm Kreuzschlitzschrauben

Your contributions are licensed under the open source Creative Commons license.