Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 7

Step 7
Use the flat end of a spudger to lift the subwoofer & right speaker connector out of its socket on the logic board.
  • Use the flat end of a spudger to lift the subwoofer & right speaker connector out of its socket on the logic board.

  • Pry up from beneath the wires.

Heble den Stecker des Tieftöners und des rechten Lautsprechers mit dem flachen Ende des Spudgers aus seinem Anschluss auf dem Logic Board hoch.

Heble unterhalb der Kabel.

Your contributions are licensed under the open source Creative Commons license.