Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 4

Step 4
Before disconnecting the camera cable, a small plastic retainer stuck to the logic board must first be moved out of the way.
  • Before disconnecting the camera cable, a small plastic retainer stuck to the logic board must first be moved out of the way.

  • Use the tip of a spudger to push the small plastic cable retainer away from the camera cable socket for enough clearance to remove the camera cable.

Bevor du das Kamerakabel ablösen kannst, musst du erst eine kleine Kunstoffhalterung, die am Logic Board festgeklebt ist, aus dem Weg schieben.

Drücke die kleine Kunstoffkabelhalterung mit der Spudgerspitze vom Anschluss des Kamerakabels weg, so dass genug Platz zum Ausbau des Kamerakabels entsteht.

Your contributions are licensed under the open source Creative Commons license.