Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 2

Step 2
Remove the three 3.1 mm Phillips screws securing the left fan to the logic board. Remove the left fan from the upper case, minding its cable that may get caught.
  • Remove the three 3.1 mm Phillips screws securing the left fan to the logic board.

  • Remove the left fan from the upper case, minding its cable that may get caught.

Entferne die drei 3,1 mm Kreuzschlitzschrauben, mit denen der linke Lüfter am Logic Board befestigt ist.

Entferne den linken Lüfter vom oberen Gehäuse, achte dabei darauf, dass sich keine Kabel verfangen.

Your contributions are licensed under the open source Creative Commons license.