Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 2

Step 2
Remove the three 3.1 mm Phillips screws securing the right fan to the logic board.
  • Remove the three 3.1 mm Phillips screws securing the right fan to the logic board.

  • In the Late 2011 MacBook Pro 17" Unibody these screws will be T6 Torx.

Entferne die drei 3,1 mm Kreuzschlitzschrauben, mit denen der rechte Lüfter am Logic Board befestigt ist.

Im MacBook Pro 17" Unibody Ende 2011 sind dies Torx T6 Schrauben.

Your contributions are licensed under the open source Creative Commons license.