Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 32 guides that include this step.

English
German

Translating step 2

Step 2
Wedge your fingers between the lower case and the vent, and lift upward to release the two clips holding the lower case to the upper case. During reassembly, carefully align the lower case and then press it firmly until both clips engage.
  • Wedge your fingers between the lower case and the vent, and lift upward to release the two clips holding the lower case to the upper case.

  • During reassembly, carefully align the lower case and then press it firmly until both clips engage.

  • Remove the lower case.

Zwänge deine Finger zwischen das Gehäuseunterteil und die Lüftungsschlitze und ziehe das Unterteil nach oben, um die Clips zu lösen, mit denen das Gehäuseunterteil am Deckel befestigt ist.

Richte beim Zusammenbau das Gehäuseunterteil sorgfältig aus und drücke es fest, bis beide Clips einrasten.

Entferne das Gehäuseunterteil.

Your contributions are licensed under the open source Creative Commons license.