Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Dutch

Translating step 1

Step 1
Remove the single short black Torx screw anchoring the metal framework to the lower casing.
  • Remove the single short black Torx screw anchoring the metal framework to the lower casing.

  • Use needle-nose pliers or a five millimeter nut driver to remove the small metal nut from the bolt.

  • If you're using pliers, be extremely careful not to let them slip or you may damage the logic board.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.