Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 48 guides that include this step.

English
German

Translating step 30

Step 30
The LCD is secured by mild adhesive that should be loosened before you flip the LCD up from its shield plate. Insert the spudger between the LCD and LCD shield plate and slide it to the far edge of the iPad. Insert the spudger between the LCD and LCD shield plate and slide it to the far edge of the iPad.
  • The LCD is secured by mild adhesive that should be loosened before you flip the LCD up from its shield plate.

  • Insert the spudger between the LCD and LCD shield plate and slide it to the far edge of the iPad.

Das LCD ist durch eine recht schwache Klebeverbindung befestigt. Diese musst du zuerst auftrennen, bevor du das LCD von der Abschirmung wegklappen kannst.

Setze den Spudger zwischen LCD und Abschirmung und schiebe ihn bis zur entfernteren Ecke des iPad.

Your contributions are licensed under the open source Creative Commons license.