Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
German

Translating step 2

Step 2
Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side. Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.
  • Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.

Lege den Cube umgekehrt hin und entferne die vier T10 Torx-Schrauben an der Frontplatte. Entferne dann die beiden Schrauben an jeder Seite.

Your contributions are licensed under the open source Creative Commons license.