Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Italian

Translating step 2

Step 2
Insert your screwdriver parallel to the motherboard between the X clamp and its retaining post. Twist the screwdriver to fully release the X clamp from its retaining post.
  • Insert your screwdriver parallel to the motherboard between the X clamp and its retaining post.

  • Twist the screwdriver to fully release the X clamp from its retaining post.

  • Repeat this process for all four corners of the X clamp.

  • When removing the last corner of the X clamp and holding the motherboard upside down, be sure to catch the GPU heat sink to avoid damage from it falling.

Infila il cacciavite tra il supporto di bloccaggio e l'X clamp parallelamente alla scheda madre.

Gira il cacciavite per rilasciare la staffa a X dal suo supporto di bloccaggio.

Ripeti questa procedura per tutti i 4 angoli del'X clamp.

Quando rilasci l'ultimo angolo della staffa tenendo la scheda madre a testa in giù, assicurati di tenere fermo il dissipatore della GPU per evitare che si danneggi cadendo.

Your contributions are licensed under the open source Creative Commons license.