Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Italian

Translating step 1

Step 1
Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink.
  • Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink.

  • Pry the X clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.

Inserisci la punta di un piccolo cacciavite piatto tra l'X clamp (la staffa a X) e il suo supporto di bloccaggio sul dissipatore.

Fai leva sulla X clamp dal suo supporto sulla scheda fino a sollevarla sopra la piccola scanalatura intagliata nel supporto stesso.

Your contributions are licensed under the open source Creative Commons license.